Torchflex TF-95-SF-Base (3.0 mm) Heat Welded Base Sheet is constructed of an inorganic reinforcing mat of high strength non-woven glass fibers, which is coated with SBS polymers and premium quality asphalt both top and bottom. The surface of the product is sanded to prevent sticking in the roll during application and to allow cap sheets to be installed via mopping asphalt or an IKO-approved cold process adhesive.

Additional Product Facts

The underside is covered with a thin micro-perforated film surface that conveniently disappears upon heat welding to the substrate. Torchflex TF-95-SF-Base (3.0 mm) can be used as the “lay-flat” base sheet in a layered membrane construction system, and also as a vapour retarder.

Find a Distributor

IKO distributors are located throughout North America. Offering a variety of products and accessories to cover board and insulation, IKO distributors have all the right IKO products to meet your commercial project needs. To find a qualified distributor in your area, please fill out the form below.

OR

*IKO does not bear any responsibility for the Distributors presented on this page. They are all independent distributors and due diligence should be taken by the consumer when entering into any agreements with those distributors who are listed here. By agreeing you absolve IKO of any involvement in transactions between yourself and the 3rd party distributors shown on this page.

View More

Find a Contractor

A network of roofing contractors may be found installing IKO roof systems and products throughout Canada and the USA. To find a qualified contractor in your area, please fill out the form below.

OR

*IKO does not bear any responsibility for the Contractors presented on this page. They are all independent contractors and due diligence should be taken by the consumer when entering into any agreements with those contractors who are listed here. By agreeing you absolve IKO of any involvement in transactions between yourself and the 3rd party contractors shown on this page.

View More