Induction-Welded
TPO Roof membrane - induction welded membrane system
Induction-Welded
Roofing System Solutions

IKO Innovi TPO single-ply membranes can be installed using the latest induction-welding equipment and techniques for an efficient, low-cost roofing application.

IKO InnoviTPO single-ply membranes can be installed using induction-welding equipment and techniques, providing a nonpenetrating TPO membrane commercial roofing fastening system. The wide-weld window achieved through the proprietary Matrix weathering formulation ensures that the membranes can be installed in a diverse range of weather conditions with no pressure to rush the job. The induction-welded system ensures high wind uplift ratings, and installation is simplified since fewer fasteners for perimeters and corners may be required, reducing labor and material costs relative to other attachment methods. An induction-welded system eliminates the need for primers and adhesives and is VOC-free. This installation is less weather-dependent than fully adhered systems. The IKO InnoviTPO membrane is attached to the InnoviFast plates by a specialty induction-welding tool. Count on IKO for performance innovation.
Membranes
Close group icon
Insulation
Close group icon
Accessories
Close group icon
Product Data Sheets
Close group icon
Safety Data Sheets
Close group icon
Installation Manuals
Close group icon
      • Installation Manual | IKO InnoviTPO Single-Ply Roofing Systems (US)
      • Installation Manual | IKO Innovi TPO Single-Ply Roofing Systems (Canada)
      • Guide | IKO Commercial Single-Ply Attachment Guide
      • Guide | Single-Ply Roofing System Building Owner's Guide
Brochures
Close group icon
      • Brochure | IKO InnoviTPO Single-Ply Roofing Solutions
3 Part Specs
Close group icon
      • IKO Innovi TPO Induction Weld Roofing System Specification (US)
      • IKO Innovi TPO Induction Weld Roofing System Specification (Canada)
CSA A123.21 Summary Reports
Close group icon
      • AARS025 | IKO Innovi TPO Fully Adhered Gypsum System
      • AARS026 | IKO Innovi TPO Over SA Vapor Retarder
      • IKO Commercial Single-ply CSA Roof Assemblies Summary Sheet
      • MARS018 | IKO Innovi TPO MA @12”o.c. (10 ft sheet width) (Canada)
      • MARS017-B IKO InnoviWeld System – 12 fasteners per board (Canada)
    • View All
Insulation Fastening Patterns
Close group icon
      • Standard Detail FP-4-4 | Insulation Fastening Pattern | 4 ft x 4 ft Board, 4 Fasteners
      • Standard Detail FP-4-6 | Insulation Fastening Pattern | 4 ft x 4 ft Board, 6 Fasteners
      • Standard Detail FP-4-8 | Insulation Fastening Pattern | 4 ft x 4 ft Board, 8 Fasteners
      • Standard Detail FP-4-9 | Insulation Fastening Pattern | 4 ft x 4 ft Board, 9 Fasteners
      • Standard Detail FP-4-11 | Insulation Fastening Pattern | 4 ft x 4 ft Board, 11 Fasteners
    • View All
Limited Warranties
Close group icon
      • Sample | IKO Single-Ply Diamond Shield Limited Warranty
      • Application | IKO Diamond Shield Limited Warranty Single-Ply (US)
      • Application | IKO Diamond Shield Limited Warranty Single-Ply (Canada)
      • Price Guide | IKO InnoviTPO Single-Ply Warranty (Canada)
      • Warranty | IKO Single-Ply Membrane Material Warranty
    • View All
Standard Details
Close group icon
      • Standard Detail RZ-1 | Roof Zones | Roof Height 60 feet or Less
      • Standard Detail RZ-2 | Roof Zones | Roof Height Greater than 60 ft
      • Standard Detail AB-4 | Insulation Adhesive Bead Pattern | 4 ft x 4 ft Board, 4 in Rows
      • Standard Detail AB-6 | Insulation Adhesive Bead Pattern | 4 ft x 4 ft Board, 6 in Rows
      • Standard Detail AB-8 | Insulation Adhesive Bead Pattern | 4 ft x 4 ft Board, 8 in Rows
    • View All